Heat pump modeling phd thesis pdf sel

Heat pump modeling phd thesis pdf sel
Abstract. This work established a thermodynamic performance model of a heat pump system containing a heat pump unit model, an air conditioning cooling and heating load calculation model, a heat exchanger model and a water pump performance model based on mass and energy balances.
Contents List of Tables……………………………………………………………………………………. xvi Nomenclature
TRNS-00267-2010 (Oct-13) Empirical Modeling of a RollingPiston Compressor Heat Pump for Predictive Control in Low Lift Cooling N.T. Gayeski, Ph.D.
Development and Application of a Ground-Coupled Heat Pump Simulation Model for Residential Code-Compliance Simulation in Texas. Doctoral dissertation, Texas A & M University. Available electronically from http : / /hdl .handle .net /1969 .1 /152691 .
Mempouo, B. (2011) Investigations of novel heat pump systems for low carbon homes. PhD thesis, University of Nottingham. Access from the University of Nottingham repository:
investigate the performance of electricity and heat networks as an integrated whole. This was based on a model of electrical power flow and hydraulic and thermal circuits together with their coupling components (CHP units, heat pumps, electric boilers and circulation pumps). The flows of energy between the electricity and heat networks through the coupling components were taken into account
Mori, Hiromi (2010) Enhancement of heat transfer for ground source heat pump systems. PhD thesis, University of Nottingham. Access from the University of Nottingham repository:
Investigation of using solar and ground source heat pump system for residential heating in Elazığ (PhD thesis). Graduate School of Natural and Applied Sciences, Firat University , Elazig, Turkey . …
instruction and PhD candidate Sondre for the providing crucial data for performing simulation. ii Abstract This thesis concerns the regional hydraulic and thermal interference between well doublets of ground source heat pump systems. The thesis falls into three parts of which the first focus on theoretical review of operating mechanism and available modelling methodology of ground source heat
The limits for the model of the absorption heat pump cycles will be at the heat pumps input and output of low pressure steam, condensate from the flue gas cleaning and the district heating water respectively.
A Review of Market-Available Solar Thermal Heat Pump Systems . A technical report of subtask A . Date: 18.03.2013 . By Jörn Ruschenburg and Sebastian Herkel1 with contributions from W. Becke, M.
GNS Science Structure, Heat and Fluid Flow • PhD thesis (Massiot) “Fracture System Characterisation and Implications for Fluid Flow in Volcanic and Metamorphic Rocks”
Heat Transfer Model of Vertical Geothermal Heat Exchanger
https://www.youtube.com/embed/VTzfaY2kx0U
Control of hybrid systems based heat pump and using
Simulation and analysis on thermodynamic performance of
INVESTIGATION OF SOLAR ASSISTED HEAT PUMP SYSTEM INTEGRATED WITH HIGH-RISE RESIDENTIAL BUILDINGS YU FU, BEng, MSc Thesis submitted to the University of Nottingham
E. Bertram, Heat Pump Systems with Vertical Borehole Heat Exchanger and Uncovered Solar Thermal Collectors, 2014, PhD thesis at the Faculty of Architecture – Technical equipment of buildings, Leibniz Universität Hannover
Elaborated PhD and diploma theses Page Content At the Institute several PhDs and Master thesis students coming from different European and international Universities are working actively in …
FINAL THESIS PROPOSAL Penn State Engineering
which geothermal heat pump, solar driven heat pumps and the other types are categorized as renewable or renewable energy sources. In the present study, we investigated modeling and control of hydronic heat …
system incorporating latent and stratified thermal storage Christoph Trinkl PhD 2006 . A domestic solar/heat pump heating system incorporating latent and stratified thermal storage Christoph Trinkl A thesis submitted in partial fulfilment of the requirements of De Montfort University for the degree of Doctor of Philosophy (PhD) December 2006 Institute of Energy and Sustainable Development De
major components of a vapour-compression heat pump are examined after which the thesis examines possible heat sources and heat sinks. Next, the thesis examines the conditioned space. The thermal energy distribution systems are discussed and the heating and cooling loads are examined. In addition, advice on sizing and choosing an optimal heat pump system is offered. All of the above is the
Graduate Thesis Or Dissertation Design modeling and
The goal of this Master thesis is to develop a heat pump model library consisting of models of heat pumps and devices used in such systems e.g. accumulator tanks …
heat storages, and electric vehicles – Energy systems analysis and modelling – PhD thesis – Wind power integration with heat pumps, heat storages, and electric vehicles – Energy systems analysis and modelling by Karsten Hedegaard DTU Management Engineering, Risø campus Energy Systems Analysis In partial fulfillment of the requirements for the PhD degree 2013. f Wind power integration …
Sewage condenser is the critical component which affects the performance of the direct sewage source heat pump unit. The sewage directly flows into the condenser and transfers heat with the refrigerant. The performance of sewage condenser is different from the general water source heat pump units because of the characteristic of sewage. This paper developed a theoretical model with
Control of hybrid systems based heat pump and using renewable energy 1. GENERAL INFORMATION Call 2018-18 Topic DESCRIPTION OF THE PHD THESIS PROJECT 1.1 OBJECTIVES OF THE PROJECT BASED ON THE CURRENT STATE OF THE ART At the edge of the 21th century, in front of a strong energy demand and an increasing pollution, the energetic context has been deeply modified …
https://www.youtube.com/embed/fTAUq6G9apg
Mempouo B. (2011) Investigations of novel heat pump
iii Executive Summary . This report presents improved air conditioner (AC) and heat pump (HP) modeling methods in the context of whole-building simulation tools.
The enthalpy changing of the R-134a, which evaporates in the evaporator of the heat pump by heat from ethanol in the heat pipe, can be written as follows: where Q c is the evaporator load and h 4 is the enthalpy at the evaporator inlet.
Abstract This thesis studies the concept of reversible heat pump / organic Rankine cycle (HP/ORC) and its application in the building sector.
Geothermal Borehole Heat Exchanger Systems Miaomiao He This thesis is submitted in partial fulfilment of the requirements of De Montfort University for the award of Doctor of Philosophy Institute of Energy and Sustainable Development De Montfort University, Leicester, UK February 2012 . Numerical Modelling of Geothermal Borehole Heat Exchanger Systems i Abstract The large proportion of …Abstract. As a high efficiency, low consumption and clean energy, ground source heat pump technology has been paid more and more attention. To calculate heat transfer performance between geothermal heat exchanger and rock and soil, heat transfer model is introduced.
the minimum capital investment, heat losses and pump energy consumption. Firstly, modelling and analysis of a district heating network was conducted to obtain district heating design cases with minimum annual total energy consumption, annual
The idealised model of thermally driven heat pumps is the three or four temperature Car-not machine shown in figure (1.2) where the work output of a heat engine drives a reversed heat engine.
ADVANCES IN MODELING OF GROUND-SOURCE HEAT PUMP SYSTEMS By ANDREW D. CHIASSON Bachelor of Applied Science University of Windsor Windsor, Ontario, Canada 1989 Master of Applied Science University of Windsor Windsor, Ontario, Canada 1992 Submitted to the Faculty of the Graduate College of the Oklahoma State University in partial fulfillment of the requirements for the …
Carolina Carmo, Department of Energy Technology, will defend the thesis “Modelling and Development of Innovative Dual-Mode Smart-Grid Heat Pump with HP2Grid Functionality”.
Mathematical modeling of CO2 based heat pumping systems New developments for simulation tools to aid the design of systems for non-residential buildings Thesis for the degree of Philosophiae Doctor Trondheim, September 2009 Norwegian University of Science and Technology Faculty of Engineering Science and Technology Department of Energy and Process Engineering Trond Andresen . NTNU …
MODELING GROUND SOURCE HEAT PUMP SYSTEMS IN A BUILDING ENERGY SIMULATION PROGRAM (ENERGYPLUS) Daniel E. Fisher1 and Simon J. Rees2 1Oklahoma State University, School of Mechanical and Aerospace Engineering,
ii MODELING, VERIFICATION AND OPTIMIZATION OF HYBRID GROUND SOURCE HEAT PUMP SYSTEMS IN ENERGYPLUS Thesis Approved by: Dr. Daniel Fisher Thesis advisor
Spatially explicit techno-economic optimisation modelling
Thesis: Modeling and Evaluation of the NIST Net Zero Energy Residential Test Facility Liz Balke M.S. Graduate Student Mechanical Engineering Room: 1337 ERB Email: ebalke@wisc.edu Hometown: Cook, Minnesota . Motivation •The residential sector consumes over 20% of the total energy use in the U.S. •Net zero energy buildings reduce energy consumption and reduce dependence on non-renewable
The steady-state air-to-air heat pump model presented in this thesis was developed from the first principles. The main objective was to develop a heat pump model that can be used as a part of larger simulation models, and that will make a connection between simple models that do not describe equipment behavior accurately enough and complicated
The performance of the electrically driven water to water heat pump was analysed in depth for the winter test, in order to assess the penalisation of its performance during four different transient periods with respect the steady state working conditto ions.
ADVANCES IN MODELING OF GROUND-SOURCE HEAT PUMP
Microchannel heat exchanger thesis proposal ihelptostudy.com
Numerical Modelling of Geothermal Borehole Heat Exchanger

the development and implementation of the numerical model used in this work, which is written in the object-oriented modeling language Modelicar. Lyngby, August 2011 Martin Ryhl Kærn. ii Preface. Acknowledgements An industrial Ph.D. project is not an easy task always balancing on the border-line between interests of industry and academia. The task of writing a thesis with the right level of
Spatially explicit techno-economic optimisation modelling of UK heating futures A thesis submitted in fulfilment of the requirements for the Degree of Doctor of Philosophy
CFD Modelling of Elastohydrodynamic Lubrication By Markus Hartinger Thesis submitted for the Degree of Doctor of Philosophy of the University of London
The teachers requested written instructions were ph.d heat pump modeling thesis+pdf clear. Thus, the first threshold of understanding to help students generate ideas for what purposes?, and how you arrived at the university, comments, the editor or the corpus anal- 232 chapter 8 …
ii Abstract In this study, a heat pump test stand and a test chamber have been built for assessment of the energy savings of low-lift radiant-cooling cooling technology with pre-cooling control.
a vapor-injected heat pump system. A drop-in test was performed using R32 in a heat A drop-in test was performed using R32 in a heat pump system that is designed to utilize R410A, for both cooling and heating conditions.
The Final Thesis Proposal is intended to identify the four technical analyses topics that will be researched and conducted for the final thesis report on River Vue Apartments. The central theme of
iii plane of the superlattice is described that uses MEMs-based SiN cantilevers. Results are presented for various deposition variables, including film thickness, temperature, deposition energy, and material.
A domestic solar/heat pump heating system incorporating
Implementation and validation of a Ground Source Heat Pump
Heat Pump Water Heater Modeling eere.energy.gov
Hybrid ground source heat pump systems incorporate both ground loop heat exchangers and supplemental heat rejecters, such as cooling towers, cooling ponds, or …
The citation for this paper is: Spitler, J.D., X. Liu, S.J. Rees, C. Yavuzturk. 2005. Simulation and Optimization of Ground Source Heat Pump Systems. 8th
Abstract. Standing column wells (SCWs) have the potential to deliver much higher rates of heat transfer to geothermal heating and cooling systems in buildings via heat pumps than conventional vertical borehole heat exchange arrays.
The thesis demonstrates systematic methods of modelling and analysing certain, integrated, domestic, HVAC applications. The reference system boundaries enclose the building as a construction and as a dynamic function, a comfort-providing system based on a heat pump, a low-temperature hydronic heat distribution system and controls in a residential application. Obviously, these are not the only
2 2. ADSORPTION CYCLES Introduction. As outlined in the main introduction, one of the three ways in which the overall per-formance of the adsorption refrigerator or heat pump can be improved is through
A Simulation Model of the Transient Performance of a Heat Pump, International Journal of Refrigeration, 5: 176-184 Chylla, R.W., and A. Çinar, 1990, Design of Resilient Controllable Chemical Processes: An Autothermal Reactor Case Study, Industrial and Engineering Chemistry Research, 29: 1218-1226 Coughauowr, D.R., 1991, Process Systems Analysis and Control, Second Edition, McGraw-Hill
present PhD thesis contribute to advance in the understanding of heat transport in the subsurface, mainly in the regulation, monitoring and design of low-enthalpy geothermal systems and hydrogeological interpretations by means of temperature signals.
AN ABSTRACT OF THE THESIS OF Bruce Walter Griswold for the degree of Master of Science in Agricultural Engineering presented on November 2, 1982 Title: Development of a Water-to-Water Heat Pump for Tempering Water in Milking Parlors Abstract approved:__ _____ Martin L. Hellickson A water-to-water heat pump was specifically designed and operated to temper process water for cleansing …
Ground Source Heat Pump model in MATLAB Master’s Thesis in Sustainable Energy Systems DAMIEN CASETTA Department of Energy and Environment Division of Building Services Engineering Chalmers University of Technology Gothenburg, Sweden 2012 Master’s Thesis E2012:11. Abstract The aim of the project is the implementation of a simple Ground-Source Heat Pump (GSHP) system model …
Modelling of flexible heat demand and assessing its value
A Beat Pump Dehumidinerassisted Dryerfor Agri-foods The motivation ofthe research presented in this thesis was to investigate the potential of using a commercial 2.3 kW heat pump dehumidifier (HPD)
DYNAMIC MODELING AND CONTROL OF HYBRID GROUND SOURCE HEAT PUMP SYSTEMS CHANG CHEN A Thesis In Department of Building, Civil & Environmental Engineering
Modelling of flexible heat demand and assessing its value in low carbon electricity systems A thesis submitted to Imperial College London For the degree of Doctor of power flow problems and solutions pdf Improved modeling of unit commitment decisions under uncertainty, PhD thesis, KU Leuven, May 2016. [5] D. Patteeuw and L. Helsen (supervisor), Demand response for residential heat
You do not have access to any existing collections. You may create a new collection. A miniature reciprocating expander is being developed as part of a larger program to develop a heat actuated heat pump for portable applications. By utilizing the higher energy density of liquid hydrocarbon fuels
Simulation, Modeling and Analysis of Water to Air Heat Pump. M.S. Thesis, Department of Mechanical and Aerospace Engineering, Oklahoma State University. (downloadable at www.hvac.okstate.edu) (downloadable at www.hvac.okstate.edu)
OF WATER SLOURCE HEAT PUMPS Thesis Approved: Thesis Adviser Dean of the Graduate College ii . ACKNOWLEDGEMENTS I wish to express my sincere appreciation to all of the people who helped me to accomplish this dissertation. First and foremost, I wish to thank my advisor, Dr. Jeffrey D. Spitler. His expertise and respected reputation in the HVAC field allowed for the funding of many …
Inverse heat transfer, phd access from flux, h. Be defined by this thesis derives heat-transfer within cellular copper structures.Abstract Uptake of geothermal heat pump (GSHP) systems has been slow in some parts of the world due to the unpredictable operational performance, large installation.
The short-term behavior of ground-coupled heat pump systems is important for the design of ground loop heat exchangers, the energy analysis of ground source heat pump systems, and the design of hybrid ground source systems.
pump model, is capable of describing the evolution of non-steady batch drying. It is established that for applicable products the ICHPD configuration may increase the energy efficiency of heat pump drying by as much as a factor of three compared
In practice, heat pumps (HP) often do not perform as expected. This is due to many factors such as how well the system and the ground loop are designed, installed and subsequently maintained and how well they are operated and controlled in the field.
Doctoral Thesis- Latent Heat Thermal Energy Storage for Indoor Comfort Control v Preface This doctoral thesis is based on the PhD research work carried out in the

Fatemeh Tahersima Department of Electronic Systems

Heating and Cooling with a Heat Pump jyx.jyu.fi

Geothermal Research at GNS Science Recent Developments and

A Heat Pump Dehumidifier assisted Dryer for Agri-foods
pdf how to remove do not reupload flag Improved Modeling of Residential Air Conditioners and Heat
Optimisation Of Inter- Seasonal Ground Source Heat Pumps
PhD theses
Development and Application of a Ground-Coupled Heat Pump

CFD Modelling of Elastohydrodynamic Lubrication

MODELING GROUND SOURCE HEAT PUMP SYSTEMS IN A
Mempouo B. (2011) Investigations of novel heat pump

TRNS-00267-2010 (Oct-13) Empirical Modeling of a RollingPiston Compressor Heat Pump for Predictive Control in Low Lift Cooling N.T. Gayeski, Ph.D.
In practice, heat pumps (HP) often do not perform as expected. This is due to many factors such as how well the system and the ground loop are designed, installed and subsequently maintained and how well they are operated and controlled in the field.
The limits for the model of the absorption heat pump cycles will be at the heat pumps input and output of low pressure steam, condensate from the flue gas cleaning and the district heating water respectively.
A Simulation Model of the Transient Performance of a Heat Pump, International Journal of Refrigeration, 5: 176-184 Chylla, R.W., and A. Çinar, 1990, Design of Resilient Controllable Chemical Processes: An Autothermal Reactor Case Study, Industrial and Engineering Chemistry Research, 29: 1218-1226 Coughauowr, D.R., 1991, Process Systems Analysis and Control, Second Edition, McGraw-Hill
ii Abstract In this study, a heat pump test stand and a test chamber have been built for assessment of the energy savings of low-lift radiant-cooling cooling technology with pre-cooling control.
Thesis: Modeling and Evaluation of the NIST Net Zero Energy Residential Test Facility Liz Balke M.S. Graduate Student Mechanical Engineering Room: 1337 ERB Email: ebalke@wisc.edu Hometown: Cook, Minnesota . Motivation •The residential sector consumes over 20% of the total energy use in the U.S. •Net zero energy buildings reduce energy consumption and reduce dependence on non-renewable
INVESTIGATION OF SOLAR ASSISTED HEAT PUMP SYSTEM INTEGRATED WITH HIGH-RISE RESIDENTIAL BUILDINGS YU FU, BEng, MSc Thesis submitted to the University of Nottingham

DYNAMIC MODELING AND CONTROL OF HYBRID GROUND SOURCE HEAT
Numerical study of heat pump contact drying OUR Archive Home

which geothermal heat pump, solar driven heat pumps and the other types are categorized as renewable or renewable energy sources. In the present study, we investigated modeling and control of hydronic heat …
Development and Application of a Ground-Coupled Heat Pump Simulation Model for Residential Code-Compliance Simulation in Texas. Doctoral dissertation, Texas A & M University. Available electronically from http : / /hdl .handle .net /1969 .1 /152691 .
present PhD thesis contribute to advance in the understanding of heat transport in the subsurface, mainly in the regulation, monitoring and design of low-enthalpy geothermal systems and hydrogeological interpretations by means of temperature signals.
Elaborated PhD and diploma theses Page Content At the Institute several PhDs and Master thesis students coming from different European and international Universities are working actively in …
Contents List of Tables……………………………………………………………………………………. xvi Nomenclature
E. Bertram, Heat Pump Systems with Vertical Borehole Heat Exchanger and Uncovered Solar Thermal Collectors, 2014, PhD thesis at the Faculty of Architecture – Technical equipment of buildings, Leibniz Universität Hannover
major components of a vapour-compression heat pump are examined after which the thesis examines possible heat sources and heat sinks. Next, the thesis examines the conditioned space. The thermal energy distribution systems are discussed and the heating and cooling loads are examined. In addition, advice on sizing and choosing an optimal heat pump system is offered. All of the above is the
The steady-state air-to-air heat pump model presented in this thesis was developed from the first principles. The main objective was to develop a heat pump model that can be used as a part of larger simulation models, and that will make a connection between simple models that do not describe equipment behavior accurately enough and complicated
Modelling of flexible heat demand and assessing its value in low carbon electricity systems A thesis submitted to Imperial College London For the degree of Doctor of
instruction and PhD candidate Sondre for the providing crucial data for performing simulation. ii Abstract This thesis concerns the regional hydraulic and thermal interference between well doublets of ground source heat pump systems. The thesis falls into three parts of which the first focus on theoretical review of operating mechanism and available modelling methodology of ground source heat
Abstract This thesis studies the concept of reversible heat pump / organic Rankine cycle (HP/ORC) and its application in the building sector.
ii MODELING, VERIFICATION AND OPTIMIZATION OF HYBRID GROUND SOURCE HEAT PUMP SYSTEMS IN ENERGYPLUS Thesis Approved by: Dr. Daniel Fisher Thesis advisor
The performance of the electrically driven water to water heat pump was analysed in depth for the winter test, in order to assess the penalisation of its performance during four different transient periods with respect the steady state working conditto ions.
Ground Source Heat Pump model in MATLAB Master’s Thesis in Sustainable Energy Systems DAMIEN CASETTA Department of Energy and Environment Division of Building Services Engineering Chalmers University of Technology Gothenburg, Sweden 2012 Master’s Thesis E2012:11. Abstract The aim of the project is the implementation of a simple Ground-Source Heat Pump (GSHP) system model …

Optimisation Of Inter- Seasonal Ground Source Heat Pumps
AN ABSTRACT OF THE THESIS OF in Agricultural Engineering

the minimum capital investment, heat losses and pump energy consumption. Firstly, modelling and analysis of a district heating network was conducted to obtain district heating design cases with minimum annual total energy consumption, annual
instruction and PhD candidate Sondre for the providing crucial data for performing simulation. ii Abstract This thesis concerns the regional hydraulic and thermal interference between well doublets of ground source heat pump systems. The thesis falls into three parts of which the first focus on theoretical review of operating mechanism and available modelling methodology of ground source heat
AN ABSTRACT OF THE THESIS OF Bruce Walter Griswold for the degree of Master of Science in Agricultural Engineering presented on November 2, 1982 Title: Development of a Water-to-Water Heat Pump for Tempering Water in Milking Parlors Abstract approved:__ _____ Martin L. Hellickson A water-to-water heat pump was specifically designed and operated to temper process water for cleansing …
The limits for the model of the absorption heat pump cycles will be at the heat pumps input and output of low pressure steam, condensate from the flue gas cleaning and the district heating water respectively.
Inverse heat transfer, phd access from flux, h. Be defined by this thesis derives heat-transfer within cellular copper structures.Abstract Uptake of geothermal heat pump (GSHP) systems has been slow in some parts of the world due to the unpredictable operational performance, large installation.
Sewage condenser is the critical component which affects the performance of the direct sewage source heat pump unit. The sewage directly flows into the condenser and transfers heat with the refrigerant. The performance of sewage condenser is different from the general water source heat pump units because of the characteristic of sewage. This paper developed a theoretical model with
ADVANCES IN MODELING OF GROUND-SOURCE HEAT PUMP SYSTEMS By ANDREW D. CHIASSON Bachelor of Applied Science University of Windsor Windsor, Ontario, Canada 1989 Master of Applied Science University of Windsor Windsor, Ontario, Canada 1992 Submitted to the Faculty of the Graduate College of the Oklahoma State University in partial fulfillment of the requirements for the …
The citation for this paper is: Spitler, J.D., X. Liu, S.J. Rees, C. Yavuzturk. 2005. Simulation and Optimization of Ground Source Heat Pump Systems. 8th
The performance of the electrically driven water to water heat pump was analysed in depth for the winter test, in order to assess the penalisation of its performance during four different transient periods with respect the steady state working conditto ions.

MODELING VERIFICATION AND OPTIMIZATION OF HYBRID
Simulation and analysis on thermodynamic performance of

The teachers requested written instructions were ph.d heat pump modeling thesis pdf clear. Thus, the first threshold of understanding to help students generate ideas for what purposes?, and how you arrived at the university, comments, the editor or the corpus anal- 232 chapter 8 …
ii MODELING, VERIFICATION AND OPTIMIZATION OF HYBRID GROUND SOURCE HEAT PUMP SYSTEMS IN ENERGYPLUS Thesis Approved by: Dr. Daniel Fisher Thesis advisor
the development and implementation of the numerical model used in this work, which is written in the object-oriented modeling language Modelicar. Lyngby, August 2011 Martin Ryhl Kærn. ii Preface. Acknowledgements An industrial Ph.D. project is not an easy task always balancing on the border-line between interests of industry and academia. The task of writing a thesis with the right level of
Improved modeling of unit commitment decisions under uncertainty, PhD thesis, KU Leuven, May 2016. [5] D. Patteeuw and L. Helsen (supervisor), Demand response for residential heat
Simulation, Modeling and Analysis of Water to Air Heat Pump. M.S. Thesis, Department of Mechanical and Aerospace Engineering, Oklahoma State University. (downloadable at www.hvac.okstate.edu) (downloadable at www.hvac.okstate.edu)
iii Executive Summary . This report presents improved air conditioner (AC) and heat pump (HP) modeling methods in the context of whole-building simulation tools.
MODELING GROUND SOURCE HEAT PUMP SYSTEMS IN A BUILDING ENERGY SIMULATION PROGRAM (ENERGYPLUS) Daniel E. Fisher1 and Simon J. Rees2 1Oklahoma State University, School of Mechanical and Aerospace Engineering,
The citation for this paper is: Spitler, J.D., X. Liu, S.J. Rees, C. Yavuzturk. 2005. Simulation and Optimization of Ground Source Heat Pump Systems. 8th

MODELING GROUND SOURCE HEAT PUMP SYSTEMS IN A
Water-to-Water Heat Pump Parameter / Coefficient Generator

GNS Science Structure, Heat and Fluid Flow • PhD thesis (Massiot) “Fracture System Characterisation and Implications for Fluid Flow in Volcanic and Metamorphic Rocks”
Hybrid ground source heat pump systems incorporate both ground loop heat exchangers and supplemental heat rejecters, such as cooling towers, cooling ponds, or …
Development and Application of a Ground-Coupled Heat Pump Simulation Model for Residential Code-Compliance Simulation in Texas. Doctoral dissertation, Texas A & M University. Available electronically from http : / /hdl .handle .net /1969 .1 /152691 .
Doctoral Thesis- Latent Heat Thermal Energy Storage for Indoor Comfort Control v Preface This doctoral thesis is based on the PhD research work carried out in the
Modelling of flexible heat demand and assessing its value in low carbon electricity systems A thesis submitted to Imperial College London For the degree of Doctor of
Simulation, Modeling and Analysis of Water to Air Heat Pump. M.S. Thesis, Department of Mechanical and Aerospace Engineering, Oklahoma State University. (downloadable at www.hvac.okstate.edu) (downloadable at www.hvac.okstate.edu)
Inverse heat transfer, phd access from flux, h. Be defined by this thesis derives heat-transfer within cellular copper structures.Abstract Uptake of geothermal heat pump (GSHP) systems has been slow in some parts of the world due to the unpredictable operational performance, large installation.
iii Executive Summary . This report presents improved air conditioner (AC) and heat pump (HP) modeling methods in the context of whole-building simulation tools.
DYNAMIC MODELING AND CONTROL OF HYBRID GROUND SOURCE HEAT PUMP SYSTEMS CHANG CHEN A Thesis In Department of Building, Civil & Environmental Engineering
2 2. ADSORPTION CYCLES Introduction. As outlined in the main introduction, one of the three ways in which the overall per-formance of the adsorption refrigerator or heat pump can be improved is through
CFD Modelling of Elastohydrodynamic Lubrication By Markus Hartinger Thesis submitted for the Degree of Doctor of Philosophy of the University of London
a vapor-injected heat pump system. A drop-in test was performed using R32 in a heat A drop-in test was performed using R32 in a heat pump system that is designed to utilize R410A, for both cooling and heating conditions.

ABSTRACT Title of Dissertation INVESTIGATION OF VAPOR
Optimisation Of Inter- Seasonal Ground Source Heat Pumps

the minimum capital investment, heat losses and pump energy consumption. Firstly, modelling and analysis of a district heating network was conducted to obtain district heating design cases with minimum annual total energy consumption, annual
Inverse heat transfer, phd access from flux, h. Be defined by this thesis derives heat-transfer within cellular copper structures.Abstract Uptake of geothermal heat pump (GSHP) systems has been slow in some parts of the world due to the unpredictable operational performance, large installation.
You do not have access to any existing collections. You may create a new collection. A miniature reciprocating expander is being developed as part of a larger program to develop a heat actuated heat pump for portable applications. By utilizing the higher energy density of liquid hydrocarbon fuels
pump model, is capable of describing the evolution of non-steady batch drying. It is established that for applicable products the ICHPD configuration may increase the energy efficiency of heat pump drying by as much as a factor of three compared
Mori, Hiromi (2010) Enhancement of heat transfer for ground source heat pump systems. PhD thesis, University of Nottingham. Access from the University of Nottingham repository:
Investigation of using solar and ground source heat pump system for residential heating in Elazığ (PhD thesis). Graduate School of Natural and Applied Sciences, Firat University , Elazig, Turkey . …
GNS Science Structure, Heat and Fluid Flow • PhD thesis (Massiot) “Fracture System Characterisation and Implications for Fluid Flow in Volcanic and Metamorphic Rocks”
iii Executive Summary . This report presents improved air conditioner (AC) and heat pump (HP) modeling methods in the context of whole-building simulation tools.

Phd Essay Heat Pump Modeling Ph.d Thesis Pdf 100%
Graduate Thesis Or Dissertation Design modeling and

Sewage condenser is the critical component which affects the performance of the direct sewage source heat pump unit. The sewage directly flows into the condenser and transfers heat with the refrigerant. The performance of sewage condenser is different from the general water source heat pump units because of the characteristic of sewage. This paper developed a theoretical model with
Abstract. This work established a thermodynamic performance model of a heat pump system containing a heat pump unit model, an air conditioning cooling and heating load calculation model, a heat exchanger model and a water pump performance model based on mass and energy balances.
A Simulation Model of the Transient Performance of a Heat Pump, International Journal of Refrigeration, 5: 176-184 Chylla, R.W., and A. Çinar, 1990, Design of Resilient Controllable Chemical Processes: An Autothermal Reactor Case Study, Industrial and Engineering Chemistry Research, 29: 1218-1226 Coughauowr, D.R., 1991, Process Systems Analysis and Control, Second Edition, McGraw-Hill
Contents List of Tables……………………………………………………………………………………. xvi Nomenclature
Modelling of flexible heat demand and assessing its value in low carbon electricity systems A thesis submitted to Imperial College London For the degree of Doctor of
The limits for the model of the absorption heat pump cycles will be at the heat pumps input and output of low pressure steam, condensate from the flue gas cleaning and the district heating water respectively.
OF WATER SLOURCE HEAT PUMPS Thesis Approved: Thesis Adviser Dean of the Graduate College ii . ACKNOWLEDGEMENTS I wish to express my sincere appreciation to all of the people who helped me to accomplish this dissertation. First and foremost, I wish to thank my advisor, Dr. Jeffrey D. Spitler. His expertise and respected reputation in the HVAC field allowed for the funding of many …
The steady-state air-to-air heat pump model presented in this thesis was developed from the first principles. The main objective was to develop a heat pump model that can be used as a part of larger simulation models, and that will make a connection between simple models that do not describe equipment behavior accurately enough and complicated
The performance of the electrically driven water to water heat pump was analysed in depth for the winter test, in order to assess the penalisation of its performance during four different transient periods with respect the steady state working conditto ions.
pump model, is capable of describing the evolution of non-steady batch drying. It is established that for applicable products the ICHPD configuration may increase the energy efficiency of heat pump drying by as much as a factor of three compared
The idealised model of thermally driven heat pumps is the three or four temperature Car-not machine shown in figure (1.2) where the work output of a heat engine drives a reversed heat engine.

Numerical Modelling of Geothermal Borehole Heat Exchanger
EmpiricalModelingOfLowLiftChillerV2p Heat Pump Air

The goal of this Master thesis is to develop a heat pump model library consisting of models of heat pumps and devices used in such systems e.g. accumulator tanks …
OF WATER SLOURCE HEAT PUMPS Thesis Approved: Thesis Adviser Dean of the Graduate College ii . ACKNOWLEDGEMENTS I wish to express my sincere appreciation to all of the people who helped me to accomplish this dissertation. First and foremost, I wish to thank my advisor, Dr. Jeffrey D. Spitler. His expertise and respected reputation in the HVAC field allowed for the funding of many …
Geothermal Borehole Heat Exchanger Systems Miaomiao He This thesis is submitted in partial fulfilment of the requirements of De Montfort University for the award of Doctor of Philosophy Institute of Energy and Sustainable Development De Montfort University, Leicester, UK February 2012 . Numerical Modelling of Geothermal Borehole Heat Exchanger Systems i Abstract The large proportion of …
present PhD thesis contribute to advance in the understanding of heat transport in the subsurface, mainly in the regulation, monitoring and design of low-enthalpy geothermal systems and hydrogeological interpretations by means of temperature signals.
system incorporating latent and stratified thermal storage Christoph Trinkl PhD 2006 . A domestic solar/heat pump heating system incorporating latent and stratified thermal storage Christoph Trinkl A thesis submitted in partial fulfilment of the requirements of De Montfort University for the degree of Doctor of Philosophy (PhD) December 2006 Institute of Energy and Sustainable Development De
You do not have access to any existing collections. You may create a new collection. A miniature reciprocating expander is being developed as part of a larger program to develop a heat actuated heat pump for portable applications. By utilizing the higher energy density of liquid hydrocarbon fuels
A Simulation Model of the Transient Performance of a Heat Pump, International Journal of Refrigeration, 5: 176-184 Chylla, R.W., and A. Çinar, 1990, Design of Resilient Controllable Chemical Processes: An Autothermal Reactor Case Study, Industrial and Engineering Chemistry Research, 29: 1218-1226 Coughauowr, D.R., 1991, Process Systems Analysis and Control, Second Edition, McGraw-Hill
Doctoral Thesis- Latent Heat Thermal Energy Storage for Indoor Comfort Control v Preface This doctoral thesis is based on the PhD research work carried out in the
Mempouo, B. (2011) Investigations of novel heat pump systems for low carbon homes. PhD thesis, University of Nottingham. Access from the University of Nottingham repository:
The performance of the electrically driven water to water heat pump was analysed in depth for the winter test, in order to assess the penalisation of its performance during four different transient periods with respect the steady state working conditto ions.

SIMULATION AND OPTIMIZATION OF GROUND SOURCE HEAT PUMP
Modeling and Experimental Validation of a Low-Lift Vapor

heat storages, and electric vehicles – Energy systems analysis and modelling – PhD thesis – Wind power integration with heat pumps, heat storages, and electric vehicles – Energy systems analysis and modelling by Karsten Hedegaard DTU Management Engineering, Risø campus Energy Systems Analysis In partial fulfillment of the requirements for the PhD degree 2013. f Wind power integration …
In practice, heat pumps (HP) often do not perform as expected. This is due to many factors such as how well the system and the ground loop are designed, installed and subsequently maintained and how well they are operated and controlled in the field.
Carolina Carmo, Department of Energy Technology, will defend the thesis “Modelling and Development of Innovative Dual-Mode Smart-Grid Heat Pump with HP2Grid Functionality”.
The Final Thesis Proposal is intended to identify the four technical analyses topics that will be researched and conducted for the final thesis report on River Vue Apartments. The central theme of
The performance of the electrically driven water to water heat pump was analysed in depth for the winter test, in order to assess the penalisation of its performance during four different transient periods with respect the steady state working conditto ions.
AN ABSTRACT OF THE THESIS OF Bruce Walter Griswold for the degree of Master of Science in Agricultural Engineering presented on November 2, 1982 Title: Development of a Water-to-Water Heat Pump for Tempering Water in Milking Parlors Abstract approved:__ _____ Martin L. Hellickson A water-to-water heat pump was specifically designed and operated to temper process water for cleansing …
ii MODELING, VERIFICATION AND OPTIMIZATION OF HYBRID GROUND SOURCE HEAT PUMP SYSTEMS IN ENERGYPLUS Thesis Approved by: Dr. Daniel Fisher Thesis advisor
Mempouo, B. (2011) Investigations of novel heat pump systems for low carbon homes. PhD thesis, University of Nottingham. Access from the University of Nottingham repository:
Abstract. Standing column wells (SCWs) have the potential to deliver much higher rates of heat transfer to geothermal heating and cooling systems in buildings via heat pumps than conventional vertical borehole heat exchange arrays.
The enthalpy changing of the R-134a, which evaporates in the evaporator of the heat pump by heat from ethanol in the heat pipe, can be written as follows: where Q c is the evaporator load and h 4 is the enthalpy at the evaporator inlet.

Master Thesis Eurac Research
MODELING GROUND SOURCE HEAT PUMP SYSTEMS IN A

pump model, is capable of describing the evolution of non-steady batch drying. It is established that for applicable products the ICHPD configuration may increase the energy efficiency of heat pump drying by as much as a factor of three compared
Contents List of Tables……………………………………………………………………………………. xvi Nomenclature
TRNS-00267-2010 (Oct-13) Empirical Modeling of a RollingPiston Compressor Heat Pump for Predictive Control in Low Lift Cooling N.T. Gayeski, Ph.D.
Ground Source Heat Pump model in MATLAB Master’s Thesis in Sustainable Energy Systems DAMIEN CASETTA Department of Energy and Environment Division of Building Services Engineering Chalmers University of Technology Gothenburg, Sweden 2012 Master’s Thesis E2012:11. Abstract The aim of the project is the implementation of a simple Ground-Source Heat Pump (GSHP) system model …
2 2. ADSORPTION CYCLES Introduction. As outlined in the main introduction, one of the three ways in which the overall per-formance of the adsorption refrigerator or heat pump can be improved is through
INVESTIGATION OF SOLAR ASSISTED HEAT PUMP SYSTEM INTEGRATED WITH HIGH-RISE RESIDENTIAL BUILDINGS YU FU, BEng, MSc Thesis submitted to the University of Nottingham
Elaborated PhD and diploma theses Page Content At the Institute several PhDs and Master thesis students coming from different European and international Universities are working actively in …
a vapor-injected heat pump system. A drop-in test was performed using R32 in a heat A drop-in test was performed using R32 in a heat pump system that is designed to utilize R410A, for both cooling and heating conditions.
Thesis: Modeling and Evaluation of the NIST Net Zero Energy Residential Test Facility Liz Balke M.S. Graduate Student Mechanical Engineering Room: 1337 ERB Email: ebalke@wisc.edu Hometown: Cook, Minnesota . Motivation •The residential sector consumes over 20% of the total energy use in the U.S. •Net zero energy buildings reduce energy consumption and reduce dependence on non-renewable
Modelling of flexible heat demand and assessing its value in low carbon electricity systems A thesis submitted to Imperial College London For the degree of Doctor of
The performance of the electrically driven water to water heat pump was analysed in depth for the winter test, in order to assess the penalisation of its performance during four different transient periods with respect the steady state working conditto ions.
Hybrid ground source heat pump systems incorporate both ground loop heat exchangers and supplemental heat rejecters, such as cooling towers, cooling ponds, or …

Liz Balke sel.me.wisc.edu
Modeling and Performance Analysis of the Condenser Using

A Review of Market-Available Solar Thermal Heat Pump Systems . A technical report of subtask A . Date: 18.03.2013 . By Jörn Ruschenburg and Sebastian Herkel1 with contributions from W. Becke, M.
Spatially explicit techno-economic optimisation modelling of UK heating futures A thesis submitted in fulfilment of the requirements for the Degree of Doctor of Philosophy
The short-term behavior of ground-coupled heat pump systems is important for the design of ground loop heat exchangers, the energy analysis of ground source heat pump systems, and the design of hybrid ground source systems.
The steady-state air-to-air heat pump model presented in this thesis was developed from the first principles. The main objective was to develop a heat pump model that can be used as a part of larger simulation models, and that will make a connection between simple models that do not describe equipment behavior accurately enough and complicated
E. Bertram, Heat Pump Systems with Vertical Borehole Heat Exchanger and Uncovered Solar Thermal Collectors, 2014, PhD thesis at the Faculty of Architecture – Technical equipment of buildings, Leibniz Universität Hannover
Abstract. As a high efficiency, low consumption and clean energy, ground source heat pump technology has been paid more and more attention. To calculate heat transfer performance between geothermal heat exchanger and rock and soil, heat transfer model is introduced.
investigate the performance of electricity and heat networks as an integrated whole. This was based on a model of electrical power flow and hydraulic and thermal circuits together with their coupling components (CHP units, heat pumps, electric boilers and circulation pumps). The flows of energy between the electricity and heat networks through the coupling components were taken into account
A Beat Pump Dehumidinerassisted Dryerfor Agri-foods The motivation ofthe research presented in this thesis was to investigate the potential of using a commercial 2.3 kW heat pump dehumidifier (HPD)
Geothermal Borehole Heat Exchanger Systems Miaomiao He This thesis is submitted in partial fulfilment of the requirements of De Montfort University for the award of Doctor of Philosophy Institute of Energy and Sustainable Development De Montfort University, Leicester, UK February 2012 . Numerical Modelling of Geothermal Borehole Heat Exchanger Systems i Abstract The large proportion of …
Elaborated PhD and diploma theses Page Content At the Institute several PhDs and Master thesis students coming from different European and international Universities are working actively in …
which geothermal heat pump, solar driven heat pumps and the other types are categorized as renewable or renewable energy sources. In the present study, we investigated modeling and control of hydronic heat …
Sewage condenser is the critical component which affects the performance of the direct sewage source heat pump unit. The sewage directly flows into the condenser and transfers heat with the refrigerant. The performance of sewage condenser is different from the general water source heat pump units because of the characteristic of sewage. This paper developed a theoretical model with
The performance of the electrically driven water to water heat pump was analysed in depth for the winter test, in order to assess the penalisation of its performance during four different transient periods with respect the steady state working conditto ions.
The thesis demonstrates systematic methods of modelling and analysing certain, integrated, domestic, HVAC applications. The reference system boundaries enclose the building as a construction and as a dynamic function, a comfort-providing system based on a heat pump, a low-temperature hydronic heat distribution system and controls in a residential application. Obviously, these are not the only

Heat transport modeling in shallow aquifers uni-tuebingen.de
EmpiricalModelingOfLowLiftChillerV2p Heat Pump Air

DYNAMIC MODELING AND CONTROL OF HYBRID GROUND SOURCE HEAT PUMP SYSTEMS CHANG CHEN A Thesis In Department of Building, Civil & Environmental Engineering
Mori, Hiromi (2010) Enhancement of heat transfer for ground source heat pump systems. PhD thesis, University of Nottingham. Access from the University of Nottingham repository:
Abstract. Standing column wells (SCWs) have the potential to deliver much higher rates of heat transfer to geothermal heating and cooling systems in buildings via heat pumps than conventional vertical borehole heat exchange arrays.
The Final Thesis Proposal is intended to identify the four technical analyses topics that will be researched and conducted for the final thesis report on River Vue Apartments. The central theme of
Doctoral Thesis- Latent Heat Thermal Energy Storage for Indoor Comfort Control v Preface This doctoral thesis is based on the PhD research work carried out in the
A Review of Market-Available Solar Thermal Heat Pump Systems . A technical report of subtask A . Date: 18.03.2013 . By Jörn Ruschenburg and Sebastian Herkel1 with contributions from W. Becke, M.

Numerical study of heat pump contact drying OUR Archive Home
ABSTRACT Title of Dissertation INVESTIGATION OF VAPOR

Abstract This thesis studies the concept of reversible heat pump / organic Rankine cycle (HP/ORC) and its application in the building sector.
E. Bertram, Heat Pump Systems with Vertical Borehole Heat Exchanger and Uncovered Solar Thermal Collectors, 2014, PhD thesis at the Faculty of Architecture – Technical equipment of buildings, Leibniz Universität Hannover
The teachers requested written instructions were ph.d heat pump modeling thesis pdf clear. Thus, the first threshold of understanding to help students generate ideas for what purposes?, and how you arrived at the university, comments, the editor or the corpus anal- 232 chapter 8 …
You do not have access to any existing collections. You may create a new collection. A miniature reciprocating expander is being developed as part of a larger program to develop a heat actuated heat pump for portable applications. By utilizing the higher energy density of liquid hydrocarbon fuels
which geothermal heat pump, solar driven heat pumps and the other types are categorized as renewable or renewable energy sources. In the present study, we investigated modeling and control of hydronic heat …
Contents List of Tables……………………………………………………………………………………. xvi Nomenclature
Mori, Hiromi (2010) Enhancement of heat transfer for ground source heat pump systems. PhD thesis, University of Nottingham. Access from the University of Nottingham repository:
A Beat Pump Dehumidinerassisted Dryerfor Agri-foods The motivation ofthe research presented in this thesis was to investigate the potential of using a commercial 2.3 kW heat pump dehumidifier (HPD)
MODELING GROUND SOURCE HEAT PUMP SYSTEMS IN A BUILDING ENERGY SIMULATION PROGRAM (ENERGYPLUS) Daniel E. Fisher1 and Simon J. Rees2 1Oklahoma State University, School of Mechanical and Aerospace Engineering,
A Review of Market-Available Solar Thermal Heat Pump Systems . A technical report of subtask A . Date: 18.03.2013 . By Jörn Ruschenburg and Sebastian Herkel1 with contributions from W. Becke, M.
pump model, is capable of describing the evolution of non-steady batch drying. It is established that for applicable products the ICHPD configuration may increase the energy efficiency of heat pump drying by as much as a factor of three compared
ADVANCES IN MODELING OF GROUND-SOURCE HEAT PUMP SYSTEMS By ANDREW D. CHIASSON Bachelor of Applied Science University of Windsor Windsor, Ontario, Canada 1989 Master of Applied Science University of Windsor Windsor, Ontario, Canada 1992 Submitted to the Faculty of the Graduate College of the Oklahoma State University in partial fulfillment of the requirements for the …
The steady-state air-to-air heat pump model presented in this thesis was developed from the first principles. The main objective was to develop a heat pump model that can be used as a part of larger simulation models, and that will make a connection between simple models that do not describe equipment behavior accurately enough and complicated
Abstract. This work established a thermodynamic performance model of a heat pump system containing a heat pump unit model, an air conditioning cooling and heating load calculation model, a heat exchanger model and a water pump performance model based on mass and energy balances.
The short-term behavior of ground-coupled heat pump systems is important for the design of ground loop heat exchangers, the energy analysis of ground source heat pump systems, and the design of hybrid ground source systems.

Heat pump simulation model and optimal variable-speed
Heating and Cooling with a Heat Pump jyx.jyu.fi

OF WATER SLOURCE HEAT PUMPS Thesis Approved: Thesis Adviser Dean of the Graduate College ii . ACKNOWLEDGEMENTS I wish to express my sincere appreciation to all of the people who helped me to accomplish this dissertation. First and foremost, I wish to thank my advisor, Dr. Jeffrey D. Spitler. His expertise and respected reputation in the HVAC field allowed for the funding of many …
Ground Source Heat Pump model in MATLAB Master’s Thesis in Sustainable Energy Systems DAMIEN CASETTA Department of Energy and Environment Division of Building Services Engineering Chalmers University of Technology Gothenburg, Sweden 2012 Master’s Thesis E2012:11. Abstract The aim of the project is the implementation of a simple Ground-Source Heat Pump (GSHP) system model …
The limits for the model of the absorption heat pump cycles will be at the heat pumps input and output of low pressure steam, condensate from the flue gas cleaning and the district heating water respectively.
Simulation, Modeling and Analysis of Water to Air Heat Pump. M.S. Thesis, Department of Mechanical and Aerospace Engineering, Oklahoma State University. (downloadable at www.hvac.okstate.edu) (downloadable at www.hvac.okstate.edu)
The citation for this paper is: Spitler, J.D., X. Liu, S.J. Rees, C. Yavuzturk. 2005. Simulation and Optimization of Ground Source Heat Pump Systems. 8th
Abstract. This work established a thermodynamic performance model of a heat pump system containing a heat pump unit model, an air conditioning cooling and heating load calculation model, a heat exchanger model and a water pump performance model based on mass and energy balances.
The goal of this Master thesis is to develop a heat pump model library consisting of models of heat pumps and devices used in such systems e.g. accumulator tanks …
2 2. ADSORPTION CYCLES Introduction. As outlined in the main introduction, one of the three ways in which the overall per-formance of the adsorption refrigerator or heat pump can be improved is through